Build it,
race it, skid it, jump it, win it!
Design and build the most
incredible stunt tracks imaginable, then
challenge friends, or cool Stunt Rally
characters, to crash test fun. Speed around
the four different worlds—Jungle, Desert,
City and Arctic—each with its unique
characteristics, hazards and boss racers.
Increase the level of difficulty with
daredevil loops, ramps and fan-assisted
jumps while skidding around pyramids, igloos
and volcanoes.
|
|
|
|
|
|
The game crashes to desktop while constructing a track or starting a
game. |
| |
This can
happen for various reasons. First determine whether the system has a
Hewlett Packard printer connected.
1. Click on START
2. Click on SETTINGS
3. Click on PRINTERS
Stunt Rally allows for printing within the application. If a Hewlett
Packard printer is installed, the printer drivers will need to be
updated to correct this issue. Contact Hewlett Packard or visit the
web site to obtain these drivers.
If updating the drivers does not resolve the issue a work around is
to install the HP 550 printer driver from the Windows 95/98 CD. Once
the HP 550 printer driver is installed please assign this printer as
the default printer on the system.
(The Windows CD might be needed on some machines to complete the
installation)
1. Start
2. Settings
3. Printers
4. Double Click on the Add New Printer icon
5. Follow the installation Wizard
6. Select Local Printer
7. The Wizard will build a list of printers
8. Choose HP under the Manufacturer list
9. Scroll down to HP 550c under the Printer list
10. Click on Next
11. Choose LPT1
12. Click on Next
13. Default Printer click on YES
14. Test Print click on NO
15. Click on Finish
16. The Printer should now be installed
To ensure this printer is the DEFAULT printer
1. Right click on the new HP 550c printer
2. Then CLICK the SET AS DEFAULT
3. Close the printer window and try Stunt Rally again.
Since this printer is not 'actually' connected to the system, it
will be necessary to change the default back to the system printer
in order to print from other applications.
If you are still experiencing a problem there might not be sufficent
resources available to run the program. End background tasks by
clicking on Ctrl+Alt+Del, and end task on everything except for
Explorer and Systray
I get the error message of "IPF in msr.exe"
This error message indicates that there is not a 3D Accelerator
available on the video card.
Lego Stunt Rally requires a 8MB Direct3D compatible video card.
Please refer the minimum system requirements for Lego Stunt Rally. |
|
|
I am getting a blank screen or corrupted graphics in the game. |
| |
1. Generally this is a
resource issue and freeing up resources should resolve the issue. To
do this:
End background tasks by pressing Ctrl+Alt+Del, and end task on
everything except for Explorer and Systray
2. In many cases updating the drivers on the computer has also
proven to resolve this issue. To do this:
Click START > RUN > Type in "dxdiag"
On the display tab, there will be information on the manufacturer of
your video card.
Check on drivers for your video card at the manufacturer's website.
If you need help installing these drivers, please contact the
manufacturer in question, as these drivers are not our products. |
|
|
I
get an error message of "Invalid Page Fault in msr.exe" |
| |
This error message
indicates that there is not a 3D Accelerator available on the video
card.
Lego Stunt Rally requires a 8MB Direct3D compatible video card.
To find out how much memory is located on the video card:
Click START > RUN > Type in "dxdiag"
On the display tab, there will be information on the manufacturer of
your video card.
On the left hand side, for Approx Total Memory, make sure that
number is 8.0 or higher. |
|
|
How can I use a
joystick or gamepad? |
To use a game controller
with LEGO Stunt Rally, the game must detect the game controller
connected to the system
To make sure the operating system detects the controller:
1. START
2. SETTINGS
3. CONTROL PANEL
4. GAME CONTROLLERS
5. Click on the GENERAL tab
6. Make sure the joystick or gamepad is listed and status is OK.
If not, refer to the hardware documentation or manufacturer to
properly set up the game controller
If the game controller is detected by the operating system, you will
need to setup LEGO Stunt Rally to use the game controller.
To use the game controller:
1. Start LEGO STUNT RALLY
2. Click on the SETTINGS button in the upper right-hand corner
3. At the bottom of the screen are the control options for Players 1
through 4
4. Click on the picture of the keyboard under the player until a
picture of a joystick appears
5. Click the BACK button in the upper left-hand corner
When you start a race, the player you selected to use the game
controller will now need to use it to compete. |
|
|
'_MSR.EXE' has encountered a problem and needs to close. |
|
If a printer is not installed on your computer then the program will
crash. |
On Windows XP Service
Pack 2 you can do either of the following to fix your problem:
1. Install a dummy Printer
2. Disable the PRINT SPOOLER service
Here are the instructions you should follow:-
Windows 98/ME
1. Click on "START"
2. Click on "SETTINGS"
3. Click on "PRINTERS"
4. Double click on "ADD PRINTER" icon
5. Press NEXT then NEXT again
- Under the heading MANUFACTURER click on "AGFA", then to the right
Click on any model of printer in the list then press NEXT, Press
NEXT, then NEXT again. When asked to print a test page select NO
then press FINISH (At this point you may be asked to insert your
windows 98 CD-ROM)
Windows XP
1. Click on 'START then PRINTERS AND FAXES
2. Click on 'Add a printer'
3. Press OK, then click NEXT, then NEXT again. When the wizard has
finished press NEXT then NEXT again.
4. Under the heading MANUFACTURER click on "AGFA"
5. Next, select any model of printer in the list then press NEXT. It
doesn’t matter that you haven't got this printer- we are simply
making Windows believe that a printer is attached.
6. Press NEXT and when asked to print a test page select NO then
press NEXT
7. Click on Finish.
Alternatively (Windows 2000/XP only)
1. Click START then RUN and type in the box "net stop spooler", then
press OK. |
|
|
|
| |
|
|
|
Win |
 |
|
Platform: |
 |
Windows® 98, 2000, Me, XP |
| CPU: |
Pentium II 233 MHz MMX or faster |
| Hard
Disk: |
350 MB free hard disk space |
| RAM: |
32 MB RAM |
|
CD-ROM: |
4X CD-ROM drive |
|
Monitor: |
640x480 monitor, 16-bit color |
|
Sound Card: |
DirectSound-compatible sound card & speakers |
|
Optional: |
none |
| Other: |
Mouse, Keyboard, DirectX 7 (supplied on CD) |
|
Video: |
|
8 MB Direct 3D-compatible video card |
|
|
|
