1. Click Start, choose Settings and then click Control Panel.
2. Double-click the Display icon.
3. In the Display Properties window, select the Settings tab.
4. Near the bottom-left portion of the window, under Colors (Windows® 98) or Color Palette (Windows® 95), click the drop-down menu and choose 256 Colors.
5. Click Apply near the bottom-right portion of the window.
6. Choose Yes if asked, "Do you want to restart the computer?"

1. Verify that the proper CD is inserted into the CD-ROM drive.
2. Click Start and select Run. The Run dialog box will open.
3. Type X:\SETUP.EXE in the Open: field. (Replace the X with the letter that identifies your CD-ROM drive.)
4. Click OK. The installation of the program should begin.
5. Follow the prompts to complete the installation.

1. Verify that the correct CD is being used when prompted to insert the disc.
2. Clean the CD. Place a small amount of nonabrasive, liquid soap on the shiny side of the disc. Using your fingertips and warm water, gently rub the soap on the disc in a circular motion. Rinse the disc thoroughly and dry it using a clean, soft T-shirt or lint-free towel. Do not use paper towels or tissue paper.
3. Change the Read Ahead setting in the following manner:

1. Return to the desktop and right click on the My Computer icon.
2. Select Properties from the menu that appears and click on the Performance tab in the Systems Properties window.
3. Click the File System button and click the CD-ROM tab.
4. Locate Optimize Access Pattern For:.
5. Click the arrow to the right of the information field and select the No Read Ahead option.
6. Restart Windows®.

4. Verify that the computer is utilizing a 32-bit file system. In the Systems Properties window (found in Step 3 above), click the Performance tab. Verify that the File System reads 32-bit. (If it reads anything else, contact the computer manufacturer for installation of the proper CD-ROM or hard drive drivers.)
5. Verify that the most current version of the driver for the CD-ROM drive is being used. Contact the computer manufacturer for additional information.
6. Try to use a different disc in the CD-ROM drive to see if it can be read.
7. If possible, insert the CD that is not being recognized into the CD-ROM drive of another computer to see if the issue remains.

1. After logging in to Windows®, insert the Word Munchers Deluxe install CD into the CD-ROM drive
   
   NOTE: If the installation does not begin, complete these steps to continue:

1. Click Start on the Windows® taskbar.
2. Click the Control Panel icon. The Control Panel window will open and the Pick a Category menu will appear. (If the menu does not appear, then it is likely that the Windows Classic View option is active. To change views, click Switch to Category View.)
3. Click the Add or Remove Programs icon. (This icon appears as CD-ROM in front of an open box.) The Add or Remove Programs window will open.
4. Click the Add New Programs icon located on the left side of the window.
5. Click the CD (or Floppy) button. A window will open entitled: "Install Program from the Floppy Disk or CD-ROM." The following prompt will also appear: "Insert the first installation disk or CD-ROM."
6. Insert the disk into the appropriate drive (if needed) and click Next. The Run Installation Program window will open. Windows® XP will automatically locate the correct installation file and disk drive. (The Browse button is used to select a different drive and/or file during the installation if desired.)
7. Click Finish to begin the installation.

NOTE: If the system is setup with multiple user accounts, a window may appear entitled: "Install Programs as Other User." Some programs require the user to have Administrative Privileges in order to run the installation. If assistance is needed to manipulate user-account settings, refer to the Windows® XP Help section, the system administrator or contact technical support for the particular computer. Successful installation of the program may not be possible without Administrator Privileges. Click OK to close this window.

2. Follow the onscreen instructions to install the program.

NOTE: If you encounter problems and are unable to successfully install the program, continue with Installing Programs Using the Program Compatibility Wizard listed below.

Installing Word Munchers™ Deluxe Using the Program Compatibility Wizard

Most programs designed for an earlier version of the Windows® operating system will install and run properly on Windows® XP. In some instances, however, when attempting to install such a program, various issues can occur. The information and procedure presented in this section will help you to install a program (designed for earlier versions of Windows®) by using the Program Compatibility Wizard.

NOTE: Windows® XP allows different options for viewing graphical interface. The following procedure assumes that the default Windows® XP view settings are used, rather than the Classic Start Menu View.

1. Uninstall the program using the Add or Remove Programs Control Panel (Steps a-c under Installing in Windows® XP).
2. After removing the program, or if the program does not show in the Add or Remove Programs Control Panel, continue with the next step.
3. Verify the Minimum System Requirements of the program that is to be installed. (This information will be needed as the procedure below is completed.)
4. Close programs and return to the desktop.
5. Insert the program (or installation) CD into the CD-ROM drive.
   
   NOTE: If a program installation screen appears prompting you to install the program, click the selection (i.e., No, Cancel or Exit the Installation, etc.) that will cancel the installation, and return to the desktop.
    
6. Click Start on the Windows® taskbar.
7. Click All Programs, choose Accessories and select Program Compatibility Wizard. The icon appears as a question mark (?). The Program Compatibility Wizard Welcome window will open.
8. Click Next.
9. Click the "I want to use the program in the CD-ROM drive" radio button.
10. Click Next. A window presenting the different Windows® Compatibility Modes will open.
11. Click the radio button next to the desired Compatibility Mode and click Next. (Consult the Minimum System Requirements of the program that is to be installed [Step 1] for system information.) The window that appears allows for the selection of 256 Colors and/or 640 X 480 Pixel Screen Resolution.
    
    NOTE: These display settings are not available options in Windows® XP. They are only available when running a program in Program Compatibility Mode. The only reason to choose either of these settings is if you are experiencing difficulty installing or running an older application designed to run in MS-DOS®, Windows® 3.1 or Windows® 95. If all options remain unchecked, then the current Colors and Screen Resolution settings will not be altered.
    
    By default, Windows® XP uses visual themes that may change the appearance or behavior of other programs, especially those games or educational programs that include intensive graphics and animation. To prevent the visual themes from affecting these programs, check Disable Visual Themes.
     
12. Click Next. A window showing the heading "Test Your Compatibility Settings" will appear. In addition, the settings that you selected will appear.
13. Verify that the settings are correct.
    
    NOTE: If the settings are not correct, click the Back button to return to the previous screen (or screens) and make the necessary changes.
     
14. With the correct settings selected and showing in the "Test Your Compatibility Settings" window, click Next. The program installation will begin.
15. Follow the prompts to install the program.
16. After the installation is complete, close the program to return to the Program Compatibility Wizard.
    
    NOTE: After the program is closed, the window with the "Did the program work correctly?" question will reappear. The "Yes. Set this program to always use these compatibility settings" will be selected.
     
17. If the program functioned properly using the compatibility mode that was selected in Step 11 (above), click Next-the Program Compatibility Data window will open-and continue with Step 18.
    
    NOTE: If the program did not function correctly, uninstall the program (using the Add or Remove Programs Control Panel: Step 1) and repeat the above procedure, choosing different compatibility settings.
     
18. In the window that opens, select Yes or No and click Next. The Completing the Program Compatibility Wizard window will appear.
19. Click Finish to close the window.
20. Launch and use the program.

1. Close programs, return to the desktop, and click Start on the Windows® taskbar.
2. Click All Programs, choose Accessories and select Program Compatibility Wizard. The icon appears as a question mark (?). The Program Compatibility Wizard Welcome window will open.
3. Click Next.
4. Click the "I want to choose from a list of programs" radio button. A list of programs will appear.
5. Select the program that is to run in a Compatibility Mode.
6. Click Next. A window presenting the different Windows® Compatibility Modes will open.
7. Click the radio button next to the desired Compatibility Mode and click Next. The window that appears allows for the selection of 256 Colors and/or 640 X 480 Pixel Screen Resolution.
   
   NOTE: These display settings are not available options in Windows® XP. They are only available when running a program in Program Compatibility Mode. The only reason to choose either of these settings is if you are experiencing difficulty installing or running an older application designed to run in MS-DOS®, Windows® 3.1 or Windows® 95. If all options remain unchecked, then the current Colors and Screen Resolution settings will not be altered.
   
   By default, Windows® XP uses visual themes that may change the appearance or behavior of other programs, especially those games or educational programs that include intensive graphics and animation. To prevent the visual themes from affecting these programs, check Disable Visual Themes.
    
8. Click Next. A window showing the heading "Test Your Compatibility Settings" will appear. In addition, the settings that you selected will appear.
9. Verify that the settings are correct.
   
   NOTE: If the settings are not correct, click the Back button to return to the previous screen (or screens) and make the necessary changes.
    
10. With the correct settings selected and showing in the "Test Your Compatibility Settings" window, click Next. A screen showing the following question will open: "Did the program work correctly?" In addition, the program selected in Step 5 (above) will launch.
11. Run the program to test the settings.
12. After testing the settings, minimize (or close) the program to return to the Program Compatibility Wizard.
    
    NOTE: After the program is minimized (or closed), the window with the "Did the program work correctly?" question will reappear. The "Yes. Set this program to always use these compatibility settings" will be selected.
     
13. If the program functioned properly using the compatibility mode that was selected in Step 7 (above), click Next. The Program Compatibility Data window will open.
    
    NOTE: If the program did not function correctly, click "No, try different compatibility settings" and complete the Wizard. After completing the wizard, try the program again.
     
14. In the window that opens, select Yes or No and click Next. The Completing the Program Compatibility Wizard window will appear.
15. Click Finish to close the window.
16. Launch (if necessary) and use the program.

1. Close all programs and return to the desktop.
2. Click Start and select Control Panel.
3. In the Control Panel window, double-click Sounds, Speech, and Audio Devices.
4. Double-click Sounds and Audio Devices.
5. Click the Audio tab.
6. Click the down arrow next to MIDI Music Playback and change the Single Instrument selection to MPU-401 (or one most similar to this).
7. Click Apply and click OK.
8. Close all open windows and run the program.

1. Double-click My Computer.
2. Double-click Printers.
3. Right-click on the updated printer and choose Set as Default. A checkmark will appear beside the printer icon.
4. Launch and use the program.

Windows® 2000

1. Double-click My Computer.
2. Double-click Control Panel.
3. Double-click Printers.
4. Right-click on the updated printer and choose Set as Default. A checkmark will appear beside the printer icon.
5. Launch and use the program.

Windows® XP

1. Click Start and choose Printers and Faxes.
2. Right-click on the updated printer and choose Set as Default. A checkmark will appear beside the printer icon.
3. Launch and use the program.